[Milkymist-devel] Milkymist software task list

[Takeshi MATSUYA]

Hi,

> On 2010/03/01, at 5:05, Sébastien Bourdeauducq wrote:
>> On Sunday 28 February 2010 21:01:04 Richard Sharpe wrote:
>>
>> Hmmm, is this last Takeshi's version of Linux for Milkymist?
> Yes.
>
>> Where do I get the Milkymist distro from?
>
> Takeshi has made some binaries:
> http://lists.milkymist.org/pipermail/devel-milkymist.org/2010-
> February/000410.html

Here is test binary for qemu-lm32.
http://www.sfc.wide.ad.jp/~macchan/qemu-test-0301.tgz

----------------  operation log -------------------
tmatsuya at tmatsuya-pc tmp]$ wget http://www.sfc.wide.ad.jp/~macchan/qemu-test-0301.tgz
[tmatsuya at tmatsuya-pc tmp]$ 
[tmatsuya at tmatsuya-pc tmp]$ which qemu-system-lm32 
/usr/local/bin/qemu-system-lm32
[tmatsuya at tmatsuya-pc tmp]$ 
[tmatsuya at tmatsuya-pc tmp]$ file /usr/local/bin/qemu-system-lm32 
/usr/local/bin/qemu-system-lm32: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.18, stripped
[tmatsuya at tmatsuya-pc tmp]$ 
[tmatsuya at tmatsuya-pc tmp]$ uname -a
Linux tmatsuya-pc 2.6.31.12-174.2.3.fc12.x86_64 #1 SMP Mon Jan 18 19:52:07 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
[tmatsuya at tmatsuya-pc tmp]$ 
[tmatsuya at tmatsuya-pc tmp]$ qemu-system-lm32 -M milkymist -nographic -s -S -kernel vmlinux -initrd initrd.bin -append "root=/dev/ram"
Linux version 2.6.33 (tmatsuya at tmatsuya-pc) (gcc version 4.4.0 (GCC) ) #351 Sun Feb 28 14:28:14 JST 2010
bootconsole [early0] enabled
memory from 402be000 - 44000000
reserving initrd memory: 41002000 size 800000
start_mem is 0x402be000
virtual_end is 0x44000000
before free_area_init
free_area_init -> start_mem is 0x402be000
virtual_end is 0x44000000
after free_area_init
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 138720
Kernel command line: root=/dev/ram
PID hash table entries: 4096 (order: 1, 16384 bytes)
Dentry cache hash table entries: 262144 (order: 7, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 6, 524288 bytes)
Memory available: 48616k/65536k RAM, (2624k kernel code, 116k data)
Hierarchical RCU implementation.
NR_IRQS:32
Console: colour dummy device 80x25
console [tty0] enabled, bootconsole disabled
Linux version 2.6.33 (tmatsuya at tmatsuya-pc) (gcc version 4.4.0 (GCC) ) #351 Sun Feb 28 14:28:14 JST 2010
bootconsole [early0] enabled
memory from 402be000 - 44000000
reserving initrd memory: 41002000 size 800000
start_mem is 0x402be000
virtual_end is 0x44000000
before free_area_init
free_area_init -> start_mem is 0x402be000
virtual_end is 0x44000000
after free_area_init
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 138720
Kernel command line: root=/dev/ram
PID hash table entries: 4096 (order: 1, 16384 bytes)
Dentry cache hash table entries: 262144 (order: 7, 1048576 bytes)
Inode-cache hash table entries: 131072 (order: 6, 524288 bytes)
Memory available: 48616k/65536k RAM, (2624k kernel code, 116k data)
Hierarchical RCU implementation.
NR_IRQS:32
Console: colour dummy device 80x25
console [tty0] enabled, bootconsole disabled
console [ttyS0] enabled
milkymist_uart: registered real console
Calibrating delay loop... 4154.98 BogoMIPS (lpj=20774912)
Mount-cache hash table entries: 1024
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 3, 65536 bytes)
TCP established hash table entries: 65536 (order: 6, 524288 bytes)
TCP bind hash table entries: 65536 (order: 5, 262144 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (junk in compressed archive); looks like an initrd
Freeing initrd mem: 8192k freed
ROMFS MTD (C) 2007 Red Hat, Inc.
io scheduler noop registered (default)
milkymist_uart: Milkymist UART driver
ttyS0 at I/O 0x0 (irq = 3) is a milkymist_uart
milkymist_uart: added port 0 with irq 3-4 at 0x80000000
brd: module loaded
loop: module loaded
xsysace xsysace.0: xsysace: error initializing device at 0xa0000000
xsysace xsysace.0: could not initialize device, err=-12
xsysace: probe of xsysace.0 failed with error -12
Xilinx SystemACE device driver, major=254
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
ethoc-mdio: probed
TCP cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 8192KiB [1 disk] into ram disk... done.
VFS: Mounted root (ext2 filesystem) readonly on device 1:0.
starting pid 15, tty '': '/etc/init.d/rcS'
udhcpc (v1.16.0) started
Setting IP address 0.0.0.0 on eth0
Sending discover...
No lease, failing
starting pid 26, tty '': '/sbin/getty -L ttyS0 115200 vt100'

milkymist_ml401 login: root

Welcome to the Milkymist Linux


     |\  /|'||      |\  /|'   |
     | \/ ||||_/\  /| \/ ||(~~|~
     |    |||| \ \/ |    ||_) |
                _/ 

http://www.milkymist.org/

Jan  1 00:00:05 login[26]: root login on 'ttyS0'


BusyBox v1.16.0 (2010-02-24 23:49:27 JST) hush - the humble shell
Enter 'help' for a list of built-in commands.

root:~# 

--------------------
Takeshi