[Milkymist-devel] PCB layout instructions

[Sébastien Bourdeauducq]

Hi,

On Friday 26 February 2010 07:11:10 Adam Wang wrote:
> > All datasheets can be found at:
> > http://github.com/lekernel/milkymist-datasheets
> > There should be only one discrepancy: I have numbered the pins of the DIN
> > connectors according to the way they are numbered in MIDI rather than the
> > way they are numbered in the datasheet. I have double-checked the current
> > pinout and I strongly believe it to be correct.
> > In case there is anything which is not 100% clear in the datasheet, I
> > have samples of all the components in the BoM and I can make checks using
> > them.
> 
> Could you send me a list of how many samples on hand?

I have all the BoM components for at least 2 boards, and, for most parts, at 
least 5 boards. Except 330 ohm 0402 resistors that I have added later and not 
ordered. Do you need any more details (I do not have an online copy of the 
precise list, and I would need to make one)?

> Well, you listed up a great summarization, I added others on [1].
> Still working on this important stage before going for the placement.
> 
> [1] http://en.qi-hardware.com/wiki/Milkymist_One_Layout_Criteria

Good! :)

Regards,
Sébastien