[Milkymist-devel] Memory test fail on ML-401

[Clark Xin]

Hi Sébastien,

Here is the couple images I got.
http://img404.imageshack.us/gal.php?g=initialstate.jpg

initial_state is the first image I see when I started calibrate utility.
DQxx are the images when I change DQS value, then press t.

thanks

On Fri, Jul 17, 2009 at 10:08 AM, Sébastien Bourdeauducq <
sebastien.bourdeauducq at lekernel.net> wrote:

> Hi,
>
> Can you connect a VGA monitor to your board, load the file SPLASH.RAW to
> your
> CF card (found in the "splash" directory), re-run "calibrate", type "t",
> upload a picture of your screen somewhere (www.milkymist.org/wiki for
> example)
> and send the link to the mailing list?
>
> (Test card technique like in the old days of TV to see at a glimpse what is
> wrong with the DDR SDRAM without a multi-$10k oscilloscope =)
>
> Cheers,
> Sébastien
>
>
> On Friday 17 July 2009 08.55.11 Clark Xin wrote:
> > I am using binaries of 2009-07-09 snapshot. It seems SDRAM test failed.
> > I tried to change input delay and DQS output phase with some random
> values
> > but no luck.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.milkymist.org/private.cgi/devel-milkymist.org/attachments/20090718/d5a0b8a1/attachment.htm>